Waterborne Epoxy Curing Agent Hw-735 with Light Color and Good Resistance to Yellowing

• Customization: Available
• Status: Liquid State
• Color(Gardner): <5
• Model NO.: HW-735
• Viscosity(Bh Model Cps/25ºC): 20
• Amine [Mg KOH/G]: 220
• Solid Content %: 55
• a.H.E.W: 200
• Phr: 100
• Pot Life @ 23° C/Minutes: 15
• Shore D (1 Day /7 Days @23°c, 60%Rh): 55 / 70
• Transport Package: Drum
• Specification: 200kg / drum
• Trademark: Honrepoxy
• Origin: China
• HS Code: 2921300090
• Production Capacity: 90000tons Per Year

Product Description

Product Description

HW-735 is a water-based curing agent for common liquid epoxy resin, free of VOC and formaldehyde, cost-effective. It can be used for concrete floor coating with one surface in the middle of the ground, especially suitable for water-based epoxy self-leveling system with 1-3mm film thickness, good compatibility with cement, and can also be used for epoxy cement mortar

Product features:
1. VOC, no formaldehyde
2. Water-based self-leveling with 1-3 mm thick
3. Cost-effective, ground surface in unity
4. Light color, good resistance to yellowing
5. Construction is convenient, strong wet edges recovery ability

 

Physical property:

Appearance	Yellow clear liquid
Color(Gardner)	<5
Viscosity(BH model CPS/25ºC)	20
Amine [mg KOH/g]	220
Solid content %	55
A.H.E.W	200
PHR	100
Pot life @ 23° C/minutes	15
Shore D (1 day /7 days @23°C, 60%RH)	55 / 70

 
Formulation 1: waterborne concrete primer coating
This formula is intended for direct application to concrete as a primer and is ideal for use as a primer for RLC W27 curing agent self-leveling or mortar formulations.

 

A component Curing agent HW-735 Water	Primer
	50.00 10.00 60.00
B component Epoxy resin 128 Epoxy diluent AGE	45.00  5.00 50.00
C component 5.Water	84.00

Instructions for operation:
Add component B to Component A and mix at a moderate shear rate for about 2 minutes to produce a homogeneous liquid. Add component C to the mixture and continue mixing at a low shear rate for 1-2 minutes to complete the preparation of the mixture. Primer can be applied with a brush, roller, or scraper.

Formulation 2: Water-based self-leveling thick coating
The formula is very suitable for use as water-based self leveling thick coating of concrete. For best performance, apply 1 to 3 mm, but thickness can exceed 1 cm.
 

A component 1. Curing agent HW-735 25.00 2.Defoamer DF-900(modified polysiloxane) 3. Titanium Dioxide Kronos 2160  4. Barium sulfate D50 6 microns 5. Barium sulfate D50 0.7 micron 6. Quartz powder D50 3 microns 7. Water A-component operation process: Add component 1-2, stir evenly under low shear, slowly add component 3-5, and adjust the viscosity by adding part of water (component 7). Increase the speed to 5-10 m/s and grind for 10-15 minutes. Add Component 6 and remaining water (Component 7) at a low shear rate	Water-borne self-leveling -- 3K
	25.00 0.30 7.50 14.60 12.30 5.50 34.80 100.00
B- component 8. Epoxy 128FE	25.00
C-component 9. Quartz sand 0.1-0.3 mm 10. Quartz sand (D50 33 micron)	63.50 31.50
Total Weight	220.00

Operation Instructions:
Add component B to Component A and mix for about 2 minutes using a moderate shear rate to produce a homogeneous liquid. Add component C to the mixture and continue mixing at a low shear rate for 1-2 minutes to complete the preparation of the mixture.

Application Description:
It is recommended to use HW-735 water-based substrate for optimal fluidity and leveling. Apply self-leveling paint to the concrete base (primed) using a scraper or similar tool according to mixing instructions to spread the material while keeping the construction environment ventilated.

Storage and packaging
Package:200kg / drum.
At room temperature storage period of at least 24 months under sealed condition of original drum packaging.
 

Company Profile